When a customer brings an ornament to a bank, pawn shop or jeweller, someone has to decide how much real gold is in it. Get it wrong and the lender loses money, or the customer is underpaid. Professionals use four methods, often together.
Karat and fineness in one table
| Karat | Fineness | Pure gold |
|---|---|---|
| 24K | 999 | 99.9% |
| 22K | 916 | 91.6% |
| 18K | 750 | 75.0% |
| 14K | 585 | 58.5% |
Most Indian jewellery is 22K. 18K and 14K are common in stone-set and diamond jewellery, because a harder alloy holds stones better.
1. The touchstone test
The appraiser rubs the ornament on a fine black stone, leaving a thin streak of metal. Next to it they rub test needles of known karat. Then they apply acid. Lower-purity metal dissolves, and pure gold stays. By comparing how the streak holds up against the needles, a trained appraiser reads the karat within a few minutes, with almost no damage to the ornament.
It is fast and cheap, which is why it is still the first test at most gold loan counters. Its weakness is that it reads only the surface, so a thick plating over base metal can pass if the appraiser rubs too lightly.
2. Acid testing on the ornament
A tiny scratch is made in an inconspicuous spot and acid is applied. Base metal under a gold coat reacts, often turning green. Appraisers use this when a piece feels too light, the colour is uneven, or the touchstone streak looks suspicious.
3. XRF machines
X-ray fluorescence analysers read the metals in an ornament without touching it and print a purity report in seconds. Many jewellers and banks now use them. They also read only the surface layer, so filled and thickly plated pieces can still fool a machine. A good appraiser treats the XRF report as one opinion, not the final word.
4. Specific gravity
Gold is very dense, about 19.3 grams per cubic centimetre. Weighing an ornament in air and then in water shows its density, which drops when there is base metal inside. This catches hollow and filled pieces that surface tests miss, but it needs care with stone-set or hollow jewellery.
And the hallmark?
A BIS hallmark with a 6-digit HUID tells you the purity the ornament was certified at when it was made. It is the best starting point, but it is not a test. Appraisers still check the gold, because hallmarks can be faked and ornaments can be repaired with lower-karat solder.
Why appraisers combine methods
- Touchstone for a fast, reliable karat reading
- Acid or a scratch test when the surface looks too good
- Specific gravity for heavy or suspicious pieces
- XRF and hallmark as supporting evidence
Learning when to use which test, and how to read the result with confidence, is the core of our Gold Appraisal course. You practise every method on real ornaments, including the fakes appraisers actually see at counters.

